How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of special steps to install an additional ignition key. It requires dealer service using a handheld computer called Tech-2. Then a new key as well as transponder have to be purchased and then programmed to the car.
Make sure to rotate your keys in order to prevent one from wearing out more than the next. This will keep your keys in good condition.
Replacement Case
The new key fobs are not like the older Saab keys. They have electronics that make it difficult to duplicate. This has made theft of cars much more difficult than it was twenty years ago. It has also made it more expensive to replace keys lost.
Saab 9-3 owners must have two keys that work. It's expensive to replace a lost key, as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers will typically charge $100-$200 to do this.
There are options to avoid the high cost. Some parts providers will find the code on an old key (usually the same one that opens the doors and turns on the ignition) and cut a brand new key blade out of metal for less than the dealer's cost. The key must be exactly the same as the original for it to function in your vehicle.
saab 9-3 key can also replace the case yourself by following these steps. You'll need an open-faced screwdriver and patience. With the screwdriver, you can pry away the plastic and take out the emergency key. After the case is open remove all electronics and put them back in the new case. Make sure you insert the correct key and badge back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced easily and quickly. This YouTube DIY video Cyclone Cyd, a user on YouTube, explains how to replace the battery in the remote key fob in just four steps. This tutorial should work for any modern saab key fob, although the process might differ slightly.
The first step is to find the button that lets off the backup key inside the fob. The button is usually found on the back of the fob, just below the Saab Logo. Next you will need an screwdriver with a flat head to insert into the small hole of this button. This will be enough to allow you to open the case of the fob to allow you to replace the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob and then program it to your car. The entire process should not take more than an hour or less. It's a simple procedure that doesn't require special tools.
If you lose a key, the procedure will be more complicated however, it can be completed. The dealer has to read the car's VIN and then order a replacement key blade and a TWICE module with the exact unique code. After that, they will have to cut the replacement key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob comes with an internal battery that is used to lock and unlock your car. The batteries are able to last for that is a long time, and they eventually fail. This is a common problem that occurs with all vehicles and the good news is that you can replace the batteries in many fobs, without replacing the entire case. You can buy replacement fobs on Amazon that come with all the electronics already installed, so you can just pop open the case and replace the batteries that were in the case. It is necessary to remove the emergency key before you can replace the batteries. To do this, place the screwdriver of a small flat head into the slot that is in the middle of the. The case should split when you rotate the screwdriver around it.
When you are ready to replace the keys ensure you have a spare, because this can cut down the total cost by a substantial amount. If you have an extra key, ask the dealer to cut the key and program it for your car. This is much less expensive than purchasing a new fob.
If you do not have a spare key, it is possible to add an additional key to your car, but this requires a lot research and effort. It costs a few hundred dollars to get a second car key. The computer in the vehicle must also be programmed. Professionals can do this but it's not a cheap option.
Replacement Ignition
The new SAAB 9-3 features an alarm system that is more sophisticated based on a key code. This means that in the event that you lose your only functioning key, getting another one can be very expensive because the car needs to have a specific computer module installed and it must also be specifically designed to accept a different key. Most locksmiths cannot do this and dealers can charge several hundred dollars to program the new key!
Dealers will charge you a premium to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose your only working key. We can reprogram the existing EEPROM of your car's computer to be ready for an extra key. This will save you more than 50% of the cost you would spend at an auto dealer.
If you've owned a SAAB 9-3 many years and you're aware of the ignition keys are not very durable. If your ignition key is not working correctly, you should look into replacing it. They can become sticky and the buttons can fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be done quickly.